Hire The Specialists For Your Air Conditioner Installation Needs

Installing an air conditioner can be a difficult task, particularly if not an expert on the subject. You’ll require a deep understanding of air conditioning maintenance London as well as how to set them up. Since this is a complicated job, you’ll most likely need an expert to set up your system and ensure that it runs smoothly with no issues.

Through commercial air conditioning London we pair you with our certified HVAC technicians, who will provide you with advice regarding the ideal air conditioner for your needs. We also offer installation assistance whenever needed.

There Are Several Steps Involved In The Installation Of A Brand New Air Conditioning Unit

Inspection

Our HVAC expert will visit your house and assess which air conditioner is the most effective. The split or domestic cooling system is a frequent option for families. It consists of both indoor and one for outdoor use.

Pipes that carry refrigerant through the system must also be set up in order to play a significant part in supplying cool air. Domestic units allow the cooling of multiple rooms at once as opposed to the air conditioner for a single room that only cools only one room.

In this phase, the technicians will decide where they’ll fit the new system. Modern air conditioners are more spacious than older models which allow for a bigger coil, which makes your AC more energy efficient. The space you have currently for your air conditioner might not be able to accommodate the model.

Indoor Air Quality

A crucial aspect of the comfort level in your home can be the condition of the air in your home. A dirty air filter can result in your home being overflowing with pollutants, particles, and allergens that could cause illness and make you miserable. Maintaining your air conditioner can keep the air quality in your home fresh and clean.

Reliable Operation

There’s not a lot more frustrating than when your air conditioner grinds to a halt in the middle of a scorching summer day. Regular upkeep on your air conditioning maintenance London will ensure that it functions properly all through summer, so you’ll be cool and have fun.

Removal Of The Existing Outdoor Unit

Our experts will employ an extraction machine and tank to eliminate the refrigerant from the central air conditioner of the past. This procedure is essential since it is against the law to let refrigerant out into the air without a cover.

The use of these devices permits safe removal and correct handling of refrigerant pipes. Technicians will then cut the wires in an old device, allowing them to take the system off entirely.

In Groundwork Of The Pack For The Outside Unit

This requires replacing the pads of the previous unit. A composite pad is suggest instead of concrete pads since it is able to remain outside for the duration of the life of the air conditioner. The concrete pad could change drastically, causing cracks. Repairing it can be a challenge.

The composite pads absorb the vibrations of the unit, which reduces the noise generate by the unit. After the outdoor unit has been set up and is connect moving it could cause damage; however, the composite pad could prevent this from happening in the event of a need to level.

Removal And Replacement Of The Evaporator Coil In The Indoor Environment

There are two kinds of evaporator coils, one includes a case and the other one is not. A cased coil is recommend since it comes with an insult cabinet that has removable panels. The panels allow access to the coils. The design of the panel allows the evaporator to sit on top of the furnace, making repairs and modifications simple.

Air conditioning company London will remove the plenum made of metal prior to installing the new evaporator. If you are using an uncased coil the supply plenum needs some preparation prior to a new coil being install. This helps prevent damage to the furnace or the coil.

The drainpipe that runs through the coil is made of plastic so a rail has to be put in place to create a space between the furnace as well as the coil. Our technicians then place the coil onto the plenum. If it is greater than that of the coil, the technicians construct an aluminum sheet to fill in the extra space. They then construct a plenum door to shield the coil from being damage.

Removing And Replacing Refrigerant Lines

The refrigerant line consists of two copper lines, through which the refrigerant is transported to the condenser outside and then back to the coil of evaporation. The refrigerant is transported by oil, and older systems have different oils than the latest ones.

It is crucial to ensure that the oils don’t combine as this could harm the air conditioner that is installing. If there are obstacles like walls on older lines, our technician could install the brand new one or reuse an old one.

Air conditioning London will set up hangers in the area where the lines of refrigerators pass through, to ensure that they remain in their place. They then stretch the lines and then push them back enough to get them into the valve on an outside appliance.

The line runs from the condenser for the air conditioner up to an indoor evaporator, which is located over the furnace. Then, they will install an unimportant low-voltage control wire that connects the thermostat with the furnace as well as to the unit outside. This will let you switch the air conditioner off and on.

Set Up The Outside Unit

The technicians will install the condenser of an air conditioner on the composite pad that they installed earlier. They will also examine the condenser for any damage that might have occurred during the course of transport.

If the unit is in good shape and in good condition, it can fit the line set-up to be install at the beginning of the process inside the service valve in the device. After fitting into the valve, they’ll heat the line set of copper, the service rod. As well as a filler rod to join the two, creating an unbreakable connection.

Installation Of A Filter Dryer

Filter dryers are place inside the condenser of an air conditioner because it absorbs moisture as well as provide physical filtering. A majority of manufacturers suggest that the installation of the dryer is kept near the valve for expansion on the coil inside. This protects the dryer from harsh weather that can lead it to rust.

Installation Of Wiring

Our experts will install an entirely modern service box by using the power supply you have already installed via your electrical panel. There are two kinds of disconnection boxes available. Fused and the non-fused box. The fused box can provide overcurrent protection. Most manufacturers suggest that it be use.

Condensate Drain Line Installation

The water that is generate by the cooling process is transport through the PVC pipe which connects to the coil that evaporates. The evaporator features two drains, a primary and a secondary and the primary condensate drain runs through the coil to a suitable condensate pump or drain. Our expert will install a condensate pump in the event that your home doesn’t have an underground drain.

Testing

The last step involves testing the system that has been installing. The technicians at our company will turn off the AC for between 15 and 20 minutes. This will allow the refrigerant to move through the system before it can begin the process of cooling.

Then, they will commit it to ensure all is in order prior to leave giving you confidence. In addition, commissioning the unit ensures the manufacturer’s warranty remains fully in force.