Error in Printing on Brother Printer

Are your Brother printer connect to Wi-Fi, but not printing? Is your Brother printer printing blank pages on both Windows and Mac? Are your Brother printers printing black text on both white and black pages? Common errors include printing black pages with your Brother printer.

This article will assist you in solving this problem. This article will discuss different Brother printer printing issues, and also the causes and best solutions. Otherwise, you can also look for Brother Printer Service center Dubai.

Solution 1.

Brother Printer Printing Blank Pages for Mac

To fix the problem of Brother printers creating blank documents on Mac, follow the five steps below.

1. Click to open the Apple icon
2. Next, go to “System Preference”.
3. Select the “Hardware” option. Below you’ll see “Printers & Scanners”.
4. Choose your printer and then press the minus sign.
5. To resolve the printing problem, take your Brother printer apart and then install it.

Solution 2

Brother Printer Prints Black Pages with White Text

Brother printers often print black backgrounds and white text. The most common source of this error is an update to the printer’s general driver. In just 8 steps, we’ll show you how to remove the Brother printer driver and how to install it again.

1. Click the “Windows” button, search for “Control Panel”, and hit “Enter.”
2. Select “View Devices and Printers” under the “Hardware and Sound” option.
3. Right-click the driver for your printer, then click the left-click button to select “Remove device”. To confirm deletion, click “Yes” and continue to the next step.

Note:If your printer driver is not listed, go to “Control Panel”, and click “View Devices & Printers” under “Hardware & Sound”. Click on the “Add printer” button. Wait for your system to find your printer. Next, choose “The printer I want isn’t list” even though your device appear on screen.

4. Next, choose “My printer is a little older.” Help me find it The system will look for a printer on the network. You may see a message indicating that the driver is available. Click “Next” to select “Replace” or the “Replace current driver”.
5. After you have left the default printer, click on “Next”.
6. Click “Next” to select a printer sharing option.
7. Next, set your Brother printer as the default printer and click “Finish”.
8. To test the solution to Brother printers printing pages on black backgrounds, print an experiment page.

Solution 3

Brother Printer does not print black properly

These steps will help you get rid of the problem that your Brother printer doesn’t print black.

1. To allow ink to flow, make sure the breathing tape is still on the cartridge’s middle.
2. Check that the Brother printer can recognize the new cartridge. You will need to clean the nozzle using a soft cloth.
3. Verify that all nozzles are working correctly.
4. You can clean the printhead with the kit if you find dried ink.

Solution 4

The Brother Printer will not print in color

These troubleshooting steps will assist you if your Brother printer is having issues printing colors.

1. Brother printers have warnings on some models that indicate the ink has run out. Other models will stop printing if the ink is gone. We recommend that you check whether your printer stops printing if it is empty of ink.
2. To access the cartridge for ink, you can reach the top of the Brother printer. Verify that all colors are available. If you don’t have the color you need, substitute it with another one. Each part that you move must be returned to its original position.
3. Ink may have been placed incorrectly and Brother printers will not print color. Check to make sure the cartridge is correctly installed. If it isn’t, you can gently take it out.

Solution 5

Brother Printer Cannot Print 32

Do you have trouble getting your Brother printer 32 pages printed? This is the solution. Follow these steps immediately. The next nine steps are important.

1. Turn off your Brother printer. Press the Release button on the cover.
2. Use the green handle to lift the drum unit.
3. You’ll then find the gray lock lever to your left. It will pull the drum unit’s rear and then pull it with the handles in the green.
4. Take a look inside the printer for labels and paper pieces, then take them off with your hand.
5. Next, remove the cartridge to store the toner. The drum has four slots. If you find any labels or scraps of paper near the drum’s openings, please remove them. Also, turn the drum unit over and search for labels or papers.
6. A transfer belt will be visible at the spot where the Brother printer placed the drum. You can remove it by lifting the green parts. Remove any material from the belt that you consider unlucky.
7. An empty toner container is located at the location where the belt was originally installed. You can remove it with the green handle and inspect the inside to locate any scraps.
8. After assembling the Brother printer correctly, place all components back together and press the gray lock lever.
9. Then close the front door and power on the device. The error should not appear again.

Solution 6

Printout 35 Unable to Print with Brother Printer

This error message ” Brother printer not able to print 35″ can be fixed by following the steps below:

1. You can stop all printing from your device.
2. Turn off the Brother printer. Carefully lift the cover.
3. Now the scanner cover should be visible. Take off any paper that may be stuck to the cover.
4. You should move the print head from left to right and then reverse it in the opposite direction. It could be that something is stuck in the middle of the print head and it isn’t moving smoothly. Take care to identify the source of the blockage.
5. Next, remove the jammed cover and open the back to reveal jammed papers. Once you have removed all jammed papers, turn it off.
6. Next, restart your Brother printer and confirm that the problem is solved. If any issue related to Hp printer visit Hp printer repair Dubai.

Solution 7

Brother Printer prints but cannot scan in Windows 10

We’ll show you in seven steps how to fix a Brother printer that prints but doesn’t scan. Before we start, make sure your device is turned on and is capable of printing. Also, check that your network connection works.

1. Click on “Start”, click “Control Panel”, and navigate to “Hardware and Sound”. Select “Devices & Printers”, then click on “Control Panel” and finally, right-click your device to select “Printer properties”. To verify the device’s functionality, print a test print.
2. Click on “Control Panel” again and enter “Scanner” into the search box. Select “View scanners, cameras” to ensure that the scanner icon is present. Install the scanner driver from Brother’s website if it is not.
3. Hit “Menu” to find the IP address of the Printer Brother. Next, press “Print reports”, then select “Network Config” before pressing “OK”. Choose from “Color Start” (or “Black (Mono) Start”) and hit “Exit/Stop”. Open “Control Panel” to assign the IP address of the scanner’s driver.

In the search box, type “Scanner” into the box. Click “View scanners or cameras” then “Scanner Properties”. Select your device. Click on the “Properties” button. Next, click “Continue”/ “Yes”. Next, click “Continue”/ “Yes”. Enter your IP address, and then click “OK”.

4. Go to “Control Panel” and choose “System and Security” to verify Firewall settings. Select “Windows Firewall”, then “Network and Sharing Center”. Under “View active networks”, you can check “Your network location”. Return to the Control Panel, select Windows Firewall, and then click “Turn Windows Firewall On or Off”. Turn it on and hit “Ok”.
5. Once the network operation has been completed, you can turn on the Firewall by going to “System and Security”. Choose “Windows Firewall” and then “Network and Sharing Center”. Then, select “View your active networks”.
6. Go back to “Control Panel”, click on “Windows Firewall”, then click on “Advanced Settings”, select “Inbound Rules”, and finally select “New Rule”. Click on “Port”, then hit “Next”. Enter “54925” after you have selected “UDP, Specified Local Ports”. Next, click on “Allow”. Then click “Next”. After that, check “Your network address” and then click “Next”. After filling out any details, click “Finish”.
7. If your Brother printer doesn’t print, go to “Control Panel”, select “System and Security”, then “Windows Firewall”, and finally choose “Allow an app or feature to access Windows Firewall”. Click “Change settings”, select “File sharing” and click “OK”.