Select the Right RO Water Purifier for Your Home
There is no guarantee that your drinking water is pure and germ-free, even if it appears to be clean. It could be infected with pathogenic microbes, new-age pollutants like lead and arsenic, or have an extremely high TDS level (Total Dissolved Salts).
Water-borne diseases like cholera, jaundice, and typhoid accounted for 77 percent of all diseases in India’s eight largest cities. According to the survey, TDS levels are much higher than the allowed limit in numerous parts of India, including Mumbai, Delhi, and Bangalore.
You may believe that simply boiling the water before drinking it is sufficient. However, this is not the case. Boiling only protects against microbial contamination caused by bacteria, viruses, and other germs; it does not eliminate hazardous chemicals/new age contaminants such as lead, pesticides, or physical impurities such as mud, dust, rust, and other contaminants.
RO Water Purifier can you do to ensure that the drinking water your family consumes is pure and safe?
Many people use RO water purifier to ensure that their drinking water is safe and clean. When there are so many manufacturers to select from, how do you determine which water purifier is right for you?
Before purchasing a water filter, all you need to do is conduct some research. The quality of your water is the first and most important thing you must assess. You’ll be able to figure out what kind of water filter you need once you know this. Here you’ll find everything you need to know about the various technologies on the market.
The movement of water over a membrane is referred to as osmosis
RO water purifiers are perfect if you reside in a location where the water is harsh. If the TDS (Total Dissolved Salt) levels in your water surpass the allowed threshold, your health is jeopardized. RO water purifiers lower the amount of TDS in your water to a safe level, however, they should only be used if the TDS level in your water is extremely high.
Depending on the amount of salt in the water, reverse osmosis (RO) works by forcing water through a 0.0001-micron semi-permeable membrane at high pressure. RO allows for cross-filtration of water by trapping impurities in the membrane. The dirty water flows in one direction, while the pure water flows in the opposite direction. Cross filtration eliminates pollutants from dirty water and prevents the accumulation of poisons
TDS and other pollutants are generally remove from water using RO purifiers in excess of 90%. Bacteria, viruses, protozoa, cysts, coliforms, physical and chemical contaminants, and so on are examples of impurities.
UV
UV water purifiers function best in soft water conditions with a TDS level of less than 500 mg, such as rivers or lakes.
UV purifiers generate UV rays with the help of a light source, which is then discharge into the water. When UV rays enter bacteria and modify their DNA, the pathogen is effectively dead and unable to infect or multiply! This approach destroys 99.99 percent of all bacteria that cause sickness!
These filters have no effect on the water’s chemical composition or flavor. It cannot utilize in locations with hard water because it does not change the chemical makeup of the water.
Adsorption of carbon:
Contaminants bring to the surface when water is pass over a carbon surface. Because the carbon is porous, a significant surface area for adsorption and chemical reactions is available. Granular carbon or powder carbon blocks are commonly use in these carbon filters. Pesticides, herbicides, chlorine, radon, and other toxins are regularly remove from the environment using this method. The size of particles that these filters can remove determines their grade. A 0.5-micron pore size filter is more efficient than one with a pore size of 10 microns.
Highest level of filtration feasible (UF)
During the purification process, dissolved particles with sizes ranging from 0.005-0.1 microns are eliminate. Before reversing the osmosis process, it’s widely use as a pre-treatment step (RO). The Ultrafiltration membrane works as a molecular sieve, sorting molecules according to their size. An ultra-fine filter traps most macromolecules larger than a particular size, such as colloids, bacteria, and other contaminants. Solvents and other smaller molecules can pass through the filter. They are most effective in places where the TDS concentration is less than 500 mg/liter.
Ionization
If you reside in an area where the water is hard, this method of purification is ideal. Water is run through an ion exchange resin to transform hard water to soft water. The sodium dissolves when the water passes across the surface. On the surface, calcium, magnesium, and other cations precipitate. Water hardness can reduce using ion exchange. Among the impurities that can remove are iron, lead, copper, barium, radium, and nitrates. This method is usually combine with other technologies in water purifiers.
Before you buy a water purifier, be sure it is certified by a reputable organization such as the NSF, WQA, or FDA.
With this knowledge, you may confidently choose a water logic’s water purifier that meets your requirements. Now is the time to ensure that you and your family are drinking safe, pure water.