Setek Wifi Extender Setup

SETEK technology provides an all-in-one solution to your network, speed, and streaming problems. The SETEK wifi range extender improves the speed of your network by reducing dead zones in your home or office. The range extender additionally increases the coverage area of your network.

SETEK WiFi Extender features-

Two types of SETEK wifi range extenders are available. SETEK wifi range extender SE01 and SETEK wifi range extender SE02 are the two models.

• Firstly, a feature of the Superboost wifi repeater variant of the extender is that it supports up to 300Mbps network speed.
• The second feature is that the wifi range extender is simple to set up with any brand of wifi router.
• The third attribute of a range extender is that it supports IEEE 802.11n, IEEE 802.11g, and IEEE 802.3 standards.
• Supports the fourth function of WPS-enabled devices.
• Moreover, The range extender’s final feature is two 10/100 Mbps auto-negotiation Ethernet connectors.

Setup setek wifi extender

• Setting up the SE TEK wifi range extender is straightforward. Regardless of whether you’re an experienced extender user or a beginner. Three alternative configurations are available for the SETEK range extender.

Use the wifi wizard to set up your network (WPS button)

Furthermore, Using the WPS button to set up a SE TEK wifi range extender. It enables you to configure it without the use of a computer or a mobile device. You can configure the range extender without logging in to the browser’s settings page by using the WPS button configuration.
The following are the steps to set up the SETEK wifi range extender using the WPS button:

• Plug the range extender into a power outlet near the wifi router or inside the router’s coverage zone.
• Press and hold the WPS button on the router’s back panel for five seconds. Hold the button for 1-2 seconds before releasing it.
• Within 50 seconds after pushing the WPS button on the router. Press and hold the WPS button on the range extender.
• The range extender will be restarted. It will restart automatically and connect to the router or other device successfully.

Note: If your current wifi SSID is WiFi. It will change to WiFi Plus after you connect to the range extender successfully.

• However, Place the range extender in a location where it can replicate network signals in a low-signal area. Without slowing down the connection.

Making use of a mobile device

Furthermore, The default login credentials for the SETEK wifi range extender can be configured using a mobile device. This will be printed on the extender’s label, and the extender will be inboxed.

SETEK wifi range extender credentials are as follows:

• Firstly, SETEK SE01 Default login IP address: 192.168.10.1
• SE02 Default login IP address: 192.168.1.254
• Default username – admin (Lowercase).
• Default password – admin (Lowercase).

The methods for utilizing a mobile device to set up a SETEK WiFi range extender are listed below

• Firstly, To keep the setek range extender online, plug it into a power outlet first.
• Now, turn on your cell phone. Then go to WiFi settings and look for the SSID of the range extender.
• After scanning the last time, you’ll see the SETEK wifi range extender’s default SSID, which is SETEK.

When connecting to a wifi network, the range extender does not require a password.

• Firstly, To begin, connect your mobile device to the network’s SSID.
• In the address bar of your mobile device’s browser, type 192.168.10.1.
• You will redirected to a login page.
• Now, type in your credentials ( admin in both username and password).
• You’ll be able to see a list of all the neighboring wifi devices’ SSIDs. Choose the SETEK wifi SSID and set a password for it.

Using a Personal Computer (PC) or a Laptop

Furthermore, A computer or laptop can be used to set up the SETEK wifi range extender. Using the same methods configuring a mobile device. A computer or laptop can connect to the range extender via a cable connection (port). Or a wireless network (WiFi SSID).

The procedures for utilizing a computer or laptop to set up the SETEK WiFi range extender listed below.

• Firstly, Plugin the SETEK wifi range extender into a LAN port first for wired connection to a computer or laptop.
• Alternatively, from the laptop/computer, enter the default wifi SSID.
• On your desktop, open a web browser and type http://192.168.10.1 into the URL search box. Now go to the extender’s login page.
• Logging in for the first time, use admin the login and password.
• The extender looks for available networks. A list of available wireless SSID networks broadcasting near the extender will appear.
• Allow connection from SETEK by selecting your wireless device’s SSID and entering the valid existing password.

Note: The wireless device’s SSID will now display with a plus(+) name appended after successful configuration.

FAQs

---