Maintenance Is The Key: Know When To Change The Water Purifier Filters?
Water purifiers are one of the essential appliances in our home. Drinking safe and pure water is necessary to maintain good health. Since normal water can contain numerous impure elements and dangerous pathogens, it’s essential to use a purifier to filter all the impure elements. There are lots of good water purifier services available in Kent RO Service Gurgaon.
However, it’s essential to do the regular maintenance of a water purifier to ensure its longevity as well as functionality. We know that a shield cannot keep fending off attacks of impure elements all the time. The shield and sword, or the primary mechanism of a purifier, are its filters.
So, it’s important to check the filters from time to time, as they cannot go working forever. That’s why it’s important to check and clean them periodically to ensure a consistent supply of clean, pure, and safe drinking water.
At some point in time, one has to change or replace it with a new one. So, what determines that you have to change the filter and call the service center? Well, in this article, we shall discuss some of the early indicators that will help you with this mission. You can consider these signs or factors as indicators of filter replacement.
Here Are The Indicators Of Filter Replacement
Filters are the mechanism by which a purifier does its work. Therefore, it’s important to take care of its filters. So, let’s look at some of the indicators that might help you plan the filter replacement.
#1. Waiting For A Long Time To Get Purified Water
First of all, if a water purifier is in perfect condition, or, in other words, if the filters are new, then the purified water would normally dispense as it should. However, if the filters get worn out, then the volume of water dispensed won’t be the same.
There are a few reasons why it happens. For example, an RO Service Purifier filters all the TDS, total dissolved solids, dust, debris, hard metals, and other impurities through its multi-filter technology. However, the filtered elements can clog the RO membrane or other parts of the filters in that process.
This debris would just pile up each day, and consequently, you will see that it would take a lot of time to get the purifier water dispensed. In other words, the flow rate of the water would be slower than usual. This is because of water clogging due to excess debris on the filter or membranes.
If you see that you have to wait a long time to get the purified water, then it’s probably time to change the filters for good. However, you can also do a periodical clean-up of filters to ensure that you don’t change the whole filter.
#2. Taste And Odour Of The Water Isn’t Up To The Mark
Is the taste and smell of the purified water isn’t up to the mark? Well, then surely you have to change the filters. With the continuous encountering of contaminated water with the water purifier filters and membranes, the cartridges lose their efficient absorption powers a lot.
As we know, a water purifier from RO service has multi-filters technology, like a pre-carbon filter, post-carbon filter. These are the filters that help to enhance the taste and clear the bad odors as well. However, with time, they lose their efficiency, and therefore, the TDS and other impure biological elements don’t get filtered properly.
This is what affects the taste and smell of the water. You won’t get sweet and odorless water if the filters are damaged, clogged, or worn out. That’s why it’s recommended to replace the filters timely, to reduce such problems and ensure 100% safe and sweet-tasting water.
#3. More Water Wastage Than Usual
An RO purifier discharges the wastewater during the process of purification through an outlet. However, if the filters are corrupted, you may notice that the surge in the volume of rejected water is higher than usual. If this happens, then you must change or replace the filters as soon as possible. If the filters are worn out by continuous purification work, then this problem is quite common.
#4. Brown Scaling In The Sediment Filters
An RO purifier has multi-filter technology to combat all sorts of impure elements, such as dust and debris, slits, total dissolved solids, bacteria, viruses, etc.
One of such filters is the sediment filter used to capture all the suspended particles like dirt, mud, silt, clay, etc. This filter is usually placed outside the water purifier; therefore, it’s easier to check it from time to time.
Since this filter is used to capture the hard, suspended impure [articles, there are chances that you may see a brown scaling on the filter. So, this indicates that it has been overused, and now it needs to be changed for good. If a customer replaces these filters periodically, it will only ensure the longevity of the machine.
Summing It Up
We hope that this guide on the filters will help you decide whether it’s time to change the filters. A lot of purifying services like Kent RO Service Gurgaon offer AMC and professional engineers for servicing. So, if there’s an anomaly with the filters, you can always give them a call, and they will help you out in no time.
